4. Meet Power Requirements on page 42
Ensure that power supplies are safe and appropriate for the equipment.
For details about the equipment's power requirements, see the "Technical
Specications" section.
5. Follow Applicable Industry Standards on page 44
Understand the applicable standards and ensure that they are being followed.
Operating Environment Requirements
Verify that your site meets all environmental and safety requirements.
Virtually all areas of the United States are regulated by building codes and standards.
During the early planning stages of installing or modifying your network, it is important
that you develop a thorough understanding of the regulations that pertain to your
location and industry.
Meet Building and Electrical Codes
Building and electrical codes vary depending on your location. Comply with all code
specications when planning your site and installing cable. This section lists resources
for obtaining additional information.
For information about major building codes, consult the following organization:
International Code Council (ICC)
5203 Leesburg Pike
Falls Church, VA 22041 USA
www.iccsafe.org
Operating Environment Requirements Preparing to Install
30 VSP 4900 Series Switches: Hardware Installation Guide
To Next Page
Loading...
Need help?
General
