Extreme Networks VSP 4900 Series User Manual

Power Options
Table 35: VSP 4900 Power Supply Options
Switch Model Power Supply
VSP4900-24S switch
VSP4900-24XE switch
350 W AC power supply:
Part nos. XN-ACPWR-350W-FB and 10953
350 W AC PS FB (front-to-back)
Model PSSF351101A
100-240 V 200-240 V
50/60 Hz, 1.25 A max per PS
VSP4900-48P switch
VSP4900-12MXU-12XE switch
715 W AC power supply:
Part nos. XN-ACPWR-715W-FB and 10951 715 W AC PS
FB (front-to-back)
Model PSSF711101A
100-127 V 200-240 V
50/60 Hz, 5.75A/2.75 A max per PS
VSP4900-48P switch
VSP4900-12MXU-12XE switch
1100 W AC power supply:
Part nos. XN-ACPWR-1100W-FB and 10941
1100 W AC PS FB (front to back), Model PSSF112101A
100-127 V 200-240 V
50/60 Hz, 10.5A/5.0 A max per PS
VSP4900-48P switch
VSP4900-12MXU-12XE switch
2000 W AC power supply:
Part nos. XN-ACPWR-200W-FB and XN-
ACPWR-200W-F
2000 W AC PS FB (front to back), Model
100-127 V 200-240 V
50/60 Hz, 11.5A/5.5 A max per PS
Note
XN-ACPWR-xxx-FB PSUs cannot be used with the 10941, 10951, 10953, or XN-
ACPWR-2000W-F PSUs on the same switch.
The following are the minimum software versions that are required for use with XN-
ACPWR-xxx-FB PSUs and the switch:
• EXOS version 31.3.1, EXOS version 30.7.2 for X465 only
• VOSS version 8.3
Previous software versions are not supported with XN-ACPWR-xxx-FB PSUs. You must
upgrade to the listed minimum software version or later to use any of the XN-ACPWR-
xxx-FB PSUs with the switch.
The following table lists supported PSU combinations when dual redundant PSUs are
used on the switch.
Power Options Technical Specications
80 VSP 4900 Series Switches: Hardware Installation Guide

Extreme Networks VSP 4900 Series Specifications

General

Brand	Extreme Networks
Model	VSP 4900 Series
Category	Switch
Language	English