Regulatory Information
AP-7622 Access Point Installation Guide 28
Australia
Use of 5GHz RLAN’s in Australia is restricted in the following band 5.50 – 5.65GHz.
Brazil
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode
causar interferência em Sistemas devidamente autorizados.
Chile
Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de
telecomunicaciones, relativa a radiaciones electromagnéticas.
This device complies with the Resolution Not 403 of 2008, of the Undersecretary of
telecommunications, relating to electromagnetic radiation.
Chile: (Devices with a WLAN Radio)
The device will comply with Chile's Resolution 755, part j.1) which states that the device is
set to operate in the following bands for indoor use only with maximum radiated power not
greater than 150mW:
• 2.400 hasta 2.483,5 MHz
• 5.150 hasta 5.250MHz
• 5.250 hasta 5.350MHz
• 5.725 hasta 5.850MHz
as well as that band 5150-5250MHz will be restricted to the indoor use and the maximum
radiated power density does not exceed 7.5MW / MHz in any 1 MHz band and 0.1875mW /
25kHz in any 25kHz band.
Conforme a Resolución 755 parte j.1), se ajustará el dispositivo a operar en interiores en las
siguientes bandas con una potencia máxima radiada no superior a 150mW:
• 2.400 hasta 2.483,5 MHz
• 5.150 hasta 5.250MHz
• 5.250 hasta 5.350MHz
• 5.725 hasta 5.850MHz
Además, de acuerdo con Resolución 755, para la banda 5150-5250MHz la operación del
equipo estará restringida al interior de inmuebles y la densidad de potencia radiada máxima
no supera 7,5mW/MHz en cualquier banda de 1MHz y 0.1875mW/25kHz en cualquier banda
de 25kHz.
To Next Page
Loading...
Need help?
General
