1 Go to Configure > Sites > Add.
2 Configure the site parameters.
Related Links
Site Parameters on page 65
Site Parameters
Configure the following parameters for site configuration.
Table 20: Site Configuration Parameters
Field Description
Name Determines the name of the site.
Centralized Specifies a Centralized Site.
Distributed Specifies a Distributed Site.
Country Define the regulatory country for the site. The regulatory domain of
the AP must match the Country setting for the site. This field provides
automatic search capabilities. Begin typing in the field to display the
country.
Time Zone Indicates the time zone for the selected country. This field provides
automatic search capabilities. Begin typing in the field to display the
time zone.
Related Links
Floor Plans on page 16
Site Location on page 67
Device Groups on page 12
Switches on page 113
SNMP Configuration on page 199
Distributed Site on page 11
Centralized Site on page 10
Modifying Site Configuration
Once a site is created, you can modify the configuration settings, clone the site, or delete the site. To get
started:
1 Go to Configure > Sites.
2 Select a site from the list.
3 To clone a site, click Clone and provide a name for the new site.
A message indicates if the site was successfully cloned. To open the new site, click OK.
4 To delete a site, click Delete.
A delete confirmation message displays. Click OK.
Related Links
Site Parameters on page 65
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 65
To Next Page
Loading...
