3 Enable MSTP.
Site Location
To display your site location on a physical map from the Site workbench, provide site metadata
including map coordinates. To access Site metadata:
1 Go to Configure > Sites.
2 Select a site and click the Location tab.
3 Provide the following optional information:
•
Site Manager Name
•
Site Manager Email
•
Site Manager Contact
•
Region
•
City
•
Campus
•
Map Coordinates. Select a location on the map to automatically populate the map coordinates.
4 Click Save.
Related Links
Site Parameters on page 65
Adding Device Groups to a Site
Create the site, then add device groups to the site. To understand the relationship between sites, device
groups, and access points, see Device Groups on page 12.
To add a device group to an existing site:
1 Go to Configure > Sites and select a site from the list.
2 Select Device Groups, then click Add.
3 Configure the device group settings.
Related Links
Device Groups on page 12
Device Group Settings on page 67
Profiles on page 13
RF Management on page 15
AP Adoption Rules on page 142
Device Group Settings
Configure the following parameters:
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 67
To Next Page
Loading...
