Adding or Editing a Configuration Profile on page 68
iBeacon Settings on page 81
iBeacon Scan Settings on page 82
Eddystone-url Beacon Settings on page 82
Eddystone-url Scan Settings on page 83
Thread Gateway Settings on page 84
iBeacon Settings
Table 29: iBeacon IoT Settings
Parameter Description
Application Determines application type. Select iBeacon
Advertising Interval The advertising interval for the beacon application. Valid values are:
Min (100ms) and Max (10240ms). The default value is Min (100ms).
UUID Identifier used to dierentiate a large group of related beacons. A
company can have a network of beacons with the same UUID.
Major Identifies a subset of beacons within the larger set. This value could
represent a venue specific attribute, such as a specific store or wing in
a building. Valid values are 0 to 65635.
Minor Identifies an individual beacon. Used to more precisely pinpoint
beacon location. This value complements the UUID and Major values
to provide more granular identification of a specific location, such as a
particular shelf, door-way, or item. Valid values are 0 to 65635.
Measured RSSI The calibrated (or measured) RSSI, in dBm for the beacon. The
transmitted beacon includes this value in the tag. Default values are:
iBeacon -47dBm, Eddystone beacon -5dBm. The default precision
value is acceptable in most cases. To calibrate your own precise value:
Using Eddystone Beacon, measure the actual transmitter output from 1
meter away and add 41dBm. (41dBm is the signal loss that occurs over
1 meter.) If you are using Apple iBeacon, refer to: "Calibrating iBeacon"
at https://developer.apple.com/ibeacon/Getting-Started-with-
iBeacon.pdf
Related Links
iBeacon Scan Settings on page 82
Eddystone-url Beacon Settings on page 82
Eddystone-url Scan Settings on page 83
Thread Gateway Settings on page 84
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 81
To Next Page
Loading...
