iBeacon Scan Settings
Table 30: iBeacon Scan Settings
Field Description
Application Determines application type. Select iBeacon Scan.
Destination IP Address IP address of the customer Application Server that receives the
beacon report.
Destination Port Destination Port on the customer Application Server that presents the
beacon report.
Scan Interval Determines how long to wait between scans. Valid values are: Min
(100ms) and Max (10240ms). The default value is Min (100ms).
Scan Window Determines how long to scan per channel. Valid values are Min
(100ms) and Max (10240ms).Value must be less than Scan Interval
value. Default value is 100ms.
UUID Identifier used to dierentiate a large group of related beacons. A
company can have a network of beacons with the same UUID.
Used for filtering data. ExtremeCloud Appliance forwards data with
matching UUID to the Application Server and filters out all other UUID
data. If UUID configured value is all zeros, no filtering occurs.
Min RSSI This is the signal strength required to include the packet in the BLE
report. Valid values: -10 to -100. Default value is -100. Data from
beacons with an RSSI that is less than the Min RSSI configured value is
filtered out.
Related Links
iBeacon Settings on page 81
Eddystone-url Beacon Settings on page 82
Eddystone-url Scan Settings on page 83
Thread Gateway Settings on page 84
Eddystone-url Beacon Settings
Table 31: Eddystone-url Beacon Settings
Field Description
Application Determines application type. Select Eddystone-url Beacon.
URL The URL that is included with the Eddystone-url beacon.
The URL is limited to 17 characters. The 17 characters does not include
the protocol, but it does include the domain name. A secure protocol
(HTTPS address) is required. The URL is compressed, eectively
allowing more than a 17-character input. See https://github.com/
google/eddystone/tree/master/eddystone-url for the Eddystone-url
compression rules to more accurately judge the length of your URL. If
necessary, also find third-party URL Shortening Services available on
the internet.
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 82
To Next Page
Loading...
