EasyManua.ls Logo

Extreme Networks ExtremeCloud Appliance Series - Page 83

Extreme Networks ExtremeCloud Appliance Series
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 31: Eddystone-url Beacon Settings (continued)
Field Description
Advertise Interval The advertising interval for the beacon application. Valid values are:
Min (100ms) and Max (10240ms). The default value is Min (100ms).
Measured RSSI The calibrated (or measured) RSSI, in dBm for the beacon. The
transmitted beacon includes this value in the tag. Default values are:
iBeacon -47dBm, Eddystone beacon -5dBm. The default precision
value is acceptable in most cases. To calibrate your own precise value:
Using Eddystone Beacon, measure the actual transmitter output from 1
meter away and add 41dBm. (41dBm is the signal loss that occurs over
1 meter.) If you are using Apple iBeacon, refer to: "Calibrating iBeacon"
at https://developer.apple.com/ibeacon/Getting-Started-with-
iBeacon.pdf
Related Links
iBeacon Settings on page 81
iBeacon Scan Settings on page 82
Eddystone-url Scan Settings on page 83
Thread Gateway Settings on page 84
Eddystone-url Scan Settings
Table 32: Eddystone-url Scan Settings
Parameter Description
Application Determines application type. Select Eddystone URL Scan.
Destination IP Address IP address of the customer Application Server that receives the
beacon report.
Destination Port Destination Port on the customer Application Server that presents the
beacon report.
Scan Interval Determines how long to wait between scans. Valid values are: Min
(100ms) and Max (10240ms). The default value is Min (100ms).
Scan Window Determines how long to scan per channel. Valid values are Min
(100ms) and Max (10240ms).Value must be less than Scan Interval
value. Default value is 100ms.
Min RSSI This is the signal strength required to include the packet in the BLE
report. Valid values: -10 to -100. Default value is -100. Data from
beacons with an RSSI that is less than the Min RSSI configured value is
filtered out.
Related Links
iBeacon Settings on page 81
iBeacon Scan Settings on page 82
Eddystone-url Beacon Settings on page 82
Thread Gateway Settings on page 84
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 83

Related product manuals