5 Draw the inner walls.
6 Place the devices.
7 Assign badges, and view the heat maps and device coverage.
Related Links
Floor Plan Limits on page 18
Adding a New Floor Plan on page 99
Setting a Background Image on page 100
Setting Floor Plan Scale on page 101
Drawing Boundary Walls on page 102
Drawing Inner Walls on page 103
Placing Devices on page 103
Assigning Badges on page 32
Floor Plans on page 16
Floor Plan View on page 29
Displaying an Existing Floor Plan
To display an existing floor plan in configuration mode:
1 Go to Configure > Sites. Add a new site or select a site and click Floor Plans tab.
Note
You can view existing floor plans without accessing Configure Site. Simply, select a site
and click the Floor Plans tab.
2 Click the first field to display a list of available device groups within the site.
3 Select one or more device groups.
4 Select a floor from the list of floors to the right of the map panel.
See Use Case: Device Group Filtering on page 97 for a use case scenario.
The floor plan displays.
5 Use the Draw Tools to modify the floor plan.
Related Links
Use Case: Device Group Filtering on page 97
Setting Floor Plan Scale on page 101
Drawing Boundary Walls on page 102
Drawing Inner Walls on page 103
Placing Devices on page 103
Assigning Badges on page 32
Floor Plans on page 16
Floor Plan View on page 29
Use Case: Device Group Filtering
View your devices on a floor plan to gain information about network readiness. Floor plans are
associated with the site. Each site can have one or more floor plans — typically, one plan per floor.
Configure
ExtremeCloud Appliance User Guide for version 4.36.03 97
To Next Page
Loading...
