Extreme Networks ExtremeSwitching 5720 Series - Page 6

113 pages

To Next Page

To Previous Page

Korea EMC Statement........................................................................................................................................... 108

Index.........................................................................................................................................................109

Table of Contents

vi ExtremeSwitching 5720 Series Hardware Installation Guide

Main Page

Table of Contents3
Preface7
Audience7
Text Conventions7
Documentation and Training9
Help and Support9
Subscribe to Product Announcements10
Send Feedback10
Extremeswitching 5720 Series Overview11
Management11
Cooling12
Power Supplies12
Versatile Interface Module Options12
Stacking12
Operating Temperatures13
Feature Licensing13
5720-24MW Switch Features13
5720-24MXW Switch Features14
5720-48MW Switch Features15
5720-48MXW Switch Features16
Port Partitions18
Power Supplies for Use with Your Switch19
715 W AC Power Supplies19
1100 W AC Power Supplies19
2000 W AC Power Supply20
Expansion Modules21
5720-VIM-2CE Versatile Interface Module22
5720-VIM-6YE Versatile Interface Module23
Solid-State Drives24
Site Preparation25
Plan Your Site25
Operating Environment Requirements26
Meet Building and Electrical Codes26
Set up the Wiring Closet27
Control the Temperature27
Control the Humidity Level28
Protect Your System from ESD (Electrostatic Discharge)28
Rack Specifications and Recommendations29
Mechanical Recommendations for the Rack29
Ground the Rack29
Provide Adequate Space for the Rack29
Secure the Rack30
Evaluate and Meet Cable Requirements30
Label Cables and Keep Accurate Records30
Install Cable31
Use RJ45 Connector Jackets34
Prevent Radio Frequency Interference (RFI)35
Meet Power Requirements35
Requirements for Poe Devices35
Power Supply Requirements36
Power Cord Requirements36
UPS (Uninterruptible Power Supply) Requirements36
Follow Applicable Industry Standards37
Build Stacks39
Introduction to Stacking39
Build Basic Stacks40
Summitstack Topologies42
Summitstack Terms45
Plan to Create Your Stack47
Enable and Disable the Stacking-Support Option48
Recommendations for Placing Switches for Stacked Operation48
Recommendations for Configuring Stacks49
Combine Switches from Different Series49
Select Stacking Cables50
Use the Extreme Stacking Tool50
Set up the Physical Stack51
Connect the Switches to Form the Stack Ring51
Connect Your Stack to the Management Network54
Install Your Switch55
Safety Considerations for Installation56
What You will Need for the Installation56
Attach the Switch to a Rack or Cabinet56
Four-Post Rack Mount57
Two-Post Rack Mount60
Install Optional Components65
Pluggable Transceiver Modules66
Optical Cables66
Install Internal AC Power Supplies66
Connect Network Interface Cables66
Turn on the Switch67
Activate and Verify the Switch68
Connect to a Management Console68
Log in for the First Time on Switch Engine68
Configure the Switch's IP Address for the Management VLAN69
Change the Switch os Via the Bootloader Menu70
Change the Switch os Via the Startup Menu70
Log in for the First Time on Fabric Engine71
Install Expansion Modules72
Install a Versatile Interface Module in a 5720 Series Switch72
Install an SSD Module73
Replace Internal AC Power Supplies75
Replace a 715 W AC Power Supply75
Replace an 1100 W AC Power Supply77
Replace a 2000 W AC Power Supply79
Replace Fan Modules82
Pre-Installation Requirements82
Airflow Direction Requirements82
Replace a Fan Module83
Replace a Versatile Interface Module or Solid-State Drive85
Monitor the Device87
5720 Series Leds87
Port Leds in Default (SYS) Mode88
Port Leds in SPD Mode88
Port Leds in STK Mode89
Management Port Leds89
Locator LED89
Technical Specifications90
Extremeswitching 5720 Series Technical Specifications91
Fan and Acoustic Noise91
Fan Speed and Temperature Variation92
Power Options92
Mean Time between Failures (MTBF)93
CPU and Memory94
Standards and Environmental Data94
715 W AC Power Supplies Technical Specifications96
1100 W AC Power Supplies Technical Specifications97
AC Power Supplies97
2000 W AC Power Supply Technical Specifications98
Power Cord Requirements for AC-Powered Switches and AC Power Supplies98
Console Connector Pinouts99
Safety and Regulatory Information102
Considerations before Installing102
General Safety Precautions103
Maintenance Safety104
Fiber Optic Ports and Optical Safety104
GBIC, SFP (Mini-GBIC), QSFP+, XENPAK, and XFP Regulatory Compliance105
Cable Routing for LAN Systems105
Install Power Supply Units and Connect Power106
Select Power Supply Cords106
Battery Notice107
Battery Warning - Taiwan107
EMC Warnings108
Taiwan BSMI Warning108
China CCC Warning108
Japan (VCCI Class A)108
Korea EMC Statement108

Extreme Networks ExtremeSwitching 5720 Series - Page 6

Table of Contents

Related product manuals