Table 39: Environmental Data (continued)
Taiwan RoHS - CNS 15663(2013.7)
Operating conditions Temperature range: 0°C to 50°C (32°F to 122°F)
Humidity: 10% to 95% relative humidity, non-condensing
Altitude: 0 to 3,000 meters (9,850 feet)
Operational shock (half sine): 30 m/s
2
(3 G), 11 ms, 60 shocks
Operational random vibration: 3 to 500 Hz at 1.5 G rms
Storage & transportation
conditions (packaged)
Transportation temperature: -40°C to 70°C (-40°F to 158°F)
Storage and transportation humidity: 10% to 95% relative humidity,
non-condensing
Packaged shock (half sine): 180 m/s
2
(18 G), 6 ms, 600 shocks
Packaged sine vibration: 5 to 62 Hz at velocity 5 mm/s, 62 to 500 Hz at
0.2 G
Packaged random vibration: 5 to 20 Hz at 1.0 ASD w/–3 dB/oct. from
20 to 200 Hz
Packaged Drop Height: 14 drops minimum on sides and corners at 42
inches (<15 kg box)
715 W AC Power Supplies Technical Specifications
The 715 W AC power supply with front-to-back airflow (part no. XN-ACPWR-715W-FB) is available for
use in all 5720 Series switches.
Table 40: Physical Specifications
Dimensions Height: 1.57 inches (4.0 cm)
Width: 3.25 inches (8.3 cm)
Length: 10.22 inches (26.0 cm)
Weight 2.55 lb (1.12 kg)
Table 41: Power Specifications
Voltage input range
100-240
Nominal input ratings 100-240V~, 8.5-3.5A, 50-60Hz at Full 715 W load
Maximum inrush current 45A at Max 264 VAC at 25C with cold start
Output -54Vdc, 13.24A, 715 W
Power supply input socket and cord IEC/EN 60320-1/C16 AC input receptacles
Power cord wall plug Refer to Power Cord Requirements for AC-Powered Switches
and AC Power Supplies on page 98
Eciency Minimum eciency: 88% at maximum power output
Table 42: Environmental Specifications
Operating temperature -10°C to 50°C (normal operation)
Storage temperature -40°C to 70°C
715 W AC Power Supplies Technical Specifications Technical Specifications
96 ExtremeSwitching 5720 Series Hardware Installation Guide
To Next Page
Loading...