Extreme Networks ExtremeWireless AP305C User Manual

AP305C/CX Features
The access points have the following features:
• Radios – two built-in dual-band radios
• Kensington® lock
• ETH0 Ethernet port – autosensing 10/100/1000G BASE-T/TX Mbps, with IEEE 802.3af or 802.3at
compliant Power over Ethernet (PoE), and requires a Cat5 cable
• Antennas:
◦ AP305C – four internal omnidirectional 2.4 GHz/5 GHz dual-band antennas
◦ AP305CX – four external omnidirectional 2.4 GHz/5 GHz dual-band antennas
One dual-band antenna is shared between Wi-Fi and Bluetooth Low Energy (BLE)
• Power source – 802.3af and 802.3at power over Ethernet injector
• Trusted Module Platform (TPM) chip for added security
• Operating temperature: +0 °C to +40 °C (+32 °F to +104 °F)
• Storage temperature: −40 °C to +80 °C (−40 °F to +176 °F)
AP305C/CX Overview AP305C/CX Features
ExtremeWireless™ AP305C/CX Access Points 9

Extreme Networks ExtremeWireless AP305C Specifications

General

Model	AP305C
Category	Wireless Access Point
Frequency Bands	2.4 GHz, 5 GHz
Antenna Type	Internal
PoE	802.3af/at
MIMO	2x2:2
Mounting	Ceiling, Wall
Operating Humidity	5% to 95% non-condensing
Security	WPA3, WPA2, WPA
Management	ExtremeCloud IQ, SNMP, CLI
Operating Temperature	0°C to +50°C (32°F to +122°F)