Extreme Networks ExtremeWireless AP310i User Manual

Table 10: Bracket and accessory usage for various installation options (continued)
Mounting
bracket or
accessory
Wall
instal
l
Solid
flat
ceilin
g
instal
l
Ceilin
g
install
(T-
bar)
Ceiling
install
(protruded
T-bar)
Junctio
n box
install
Beam
install
Ceiling
tile
protrusio
n
T-bar
widths
Notes
37210 flat
metal easy-
attach
adapter;
used with
main
mounting
bracket
Yes Yes No No No No No N/A Wall mount,
ceiling
mount, or
install on
any solid
surface.
37211 WS-
MBI-
DCFLUSH
bracket
No No Yes Yes No No Yes 9/16 in.,
3/2 in.,
15/16 in.
Protruded
ceiling
mount with
varying
widths.
BRKT-0001
47A-01;
beam clip
accessory
No No No No No Yes No N/A The beam
clip is
attached to
the main
mounting
bracket.
30525 WS-
CAB-RJ45-
FLT01
accessory
No Yes Yes No No No No N/A This
accessory
can be used
only with
ceiling
mount
brackets
listed in this
table.
Install the Access Point on Drywall or Wood Wall, or to a Solid Flat
Ceiling
About This Task
The access point is installed on a drywall or wood wall or to a solid flat ceiling using:
• #37201, stainless-steel main mounting bracket that ships with the unit
• #30516, WS-MBI-WALL04 bracket, two Phillips pan-head screws, and screw-in anchors
Note
T
he WALL04 bracket and screw-in anchors are used only for drywall or wood wall
mounting.
Install the Access Point
Install the Access Point on Drywall or Wood Wall, or to a
Solid Fla
t Ceiling
ExtremeWireless™ AP310i/e Access Points 15
DRAFT

Extreme Networks ExtremeWireless AP310i Specifications

General

Brand	Extreme Networks
Model	ExtremeWireless AP310i
Category	Wireless Access Point
Language	English