Commands for Configuring and Monitoring EAPS
Summit 200 Series Switch Installation and User Guide 141
Port status: • Unknown—This EAPS domain is not running, so
the port status has not yet been determined.
• Up—The port is up and is forwarding data.
• Down—The port is down.
• Blocked—The port is up, but data is blocked from
being forwarded.
Tag status: Tagged status of the control VLAN:
• Tagged—The control VLAN has this port assigned
to it, and the port is tagged in the VLAN.
• Untagged—The control VLAN has this port
assigned to it, but the port is untagged in the
control VLAN.
• Undetermined—Either a VLAN has not been
added as the control VLAN to this EAPS domain
or this port has not been added to the control
VLAN.
Hello Timer interval: The configured value of the timer.
Fail Timer interval: The configured value of the timer.
Preforwarding Timer interval:
1
The configured value of the timer. This value is set
internally by the EAPS software.
Last update:
1
Displayed only for transit nodes; indicates the last
time the transit node received a hello packet from the
master node (identified by its MAC address).
EAPS Domain has … Controller Vlans: Lists the assigned name and ID of the control VLAN.
EAPS Domain has … Protected Vlans:
2
Lists the assigned names and VLAN IDs of all the
protected VLANs configured on this EAPS domain.
Number of Protected Vlans: The count of protected VLANs configured on this
EAPS domain.
1. These fields apply only to transit nodes; they are not displayed for a master node.
2. This list is displayed when you use the detail keyword in the show eaps command.
Table 35: show eaps Display Fields (continued)
Field Description
To Next Page
Loading...
