Summit 200 Series Switch Installation and User Guide 5
Contents
Chapter 5 Managing the Switch
Overview 53
Using the Console Interface 54
Using Telnet 54
Connecting to Another Host Using Telnet 54
Configuring Switch IP Parameters 54
Disconnecting a Telnet Session 56
Controlling Telnet Access 57
Using Secure Shell 2 (SSH2) 57
Enabling SSH2 57
Using SNMP 58
Accessing Switch Agents 58
Supported MIBs 58
Configuring SNMP Settings 58
Displaying SNMP Settings 60
Authenticating Users 60
RADIUS Client 60
Configuring TACACS+ 65
Using Network Login 66
Using Network Login in Campus Mode 67
Using Network Login in ISP Mode 69
DHCP Server on the Switch 70
Network Login Configuration Commands 70
Displaying Network Login Settings 70
Disabling Network Login 71
Using EAPOL Flooding 71
Using the Simple Network Time Protocol 72
Configuring and Using SNTP 72
SNTP Configuration Commands 75
SNTP Example 75
Chapter 6 Configuring Ports on a Switch
Enabling and Disabling Switch Ports 77
Configuring Switch Port Speed and Duplex Setting 77
Switch Port Commands 79
Load Sharing on the Switch 80
Load-Sharing Algorithms 80
Configuring Switch Load Sharing 81
Load-Sharing Example 82
Verifying the Load-Sharing Configuration 82
Switch Port-Mirroring 82
To Next Page
Loading...
