RADIUS Attributes
Summit WM Technical Reference Guide, Software Version 5.1128
RADIUS Accounting
Account-Start Packet
Table 26 lists the information elements (including VSAs) supported in a RADIUS Start message, issued
by Summit WM Controller, Access Points, and WM software, with RADIUS Accounting enabled:
Account-Stop/Interim Packet
Table 27 lists the information elements (including VSAs) supported in a RADIUS Stop or Interim
messages, issued by Summit WM Controller, Access Points, and WM software, with RADIUS
Accounting enabled:
Table 26: Information elements supported in RADIUS Start messages
Attribute NO. RAD. Data Type Name
Acct-Session-Id 44 string mu_session_id
User-Name 1 string mu_user_id
Filter-Id 11 string Filter-Id (Accept-response)
Acct-Interim-Interval 85 integer (Accept-response/GUI input)
Session-Timeout 27 integer (Accept-response/GUI input)
Class 25 octets (Accept-response)
Login-LAT-Group 36 octets (Accept-response)
Acct-Status-Type 40 integer Start
Acct-Authentic 45 integer Radius/Local/Remote
Framed-IP-Address 8 ipaddr Mu_ip_address
Connect-Info 77 string 802.11 a or 802.11 a/b
NAS-port-type 61 integer 18/19
Called-Station-ID 30 string BP MAC
Calling-Station-ID 31 string mu_mac_address
NAS-IP-Address 4 ipaddr User configurable
NAS-Identifier 32 string User configurable
Acct-Delay-Time 41 integer
BP-Serial VSA string Extreme-AP-Serial
BP-Name VSA string Extreme-AP-Name
WM-AD-Name VSA string Extreme-WM-AD-Name
SSID VSA string Extreme-SSID
Table 27: Information elements supported in RADIUS Stop or Interim messages
Attribute NO. RAD. Data Type Name
Acct-Session-Id 44 string mu_session_id
User-Name 1 string mu_user_id
Filter-Id 11 string Filter-Id (Accept-response)
Acct-Interim-Interval 85 integer (Accept-response/GUI input)
To Next Page
Loading...
