Summit WM Technical Reference Guide, Software Version 5.1 149
EVENT_SERVER (1)
140 Error creating socket. Errno:
%d
141 Error binding socket. Errno:
%d
142 Socket address already in use.
143 Unable to connect to socket.
Errno: %d
144 Startup API socket accept
error. Errno: %d
145 Startup API socket select error.
Errno: %d
146 Connected to component [%d].
Table 31: EVENT_SERVER (1) logs and events
Log ID Log Message Comment Action
Critical
1 Failed to create thews thread. Internal Component Failure.
Log system may not be
working properly.
If problem persists, contact
Technical Support to
investigate.
2 Critical internal error - log file
protection flags have been
corrupted. Event server will
halt.
Internal Component Failure.
Log system may not be
working properly.
If problem persists, contact
Technical Support to
investigate.
3 Internal system interrupt
handlers failed to initialize.
Event server will halt.
Internal Component Failure.
Log system may not be
working properly.
If problem persists, contact
Technical Support to
investigate.
4 Unable to initialize internal
program thread. Event server
will halt.
Internal Component Failure.
Log system may not be
working properly.
If problem persists, contact
Technical Support to
investigate.
5 Memory allocation failure.
Unable to log last event.
Internal Component Failure.
Log system may not be
working properly.
If problem persists, contact
Technical Support to
investigate.
6 Socket call failed. Will not be
able to communicate with
specific component. Error
no:%d.
Internal Component Failure.
Log system may not be
working properly.
If problem persists, contact
Technical Support to
investigate.
7 Socket select error - 100%
CPU utilization can occur and
overall system performance will
be impaired.
Internal Component Failure.
Log system may not be
working properly.
If problem persists, contact
Technical Support to
investigate.
Table 30: STARTUP_MANAGER (0) logs and events (Continued)
Log ID Log Message Comment Action
To Next Page
Loading...
