Extreme Networks Summit WM - Altitude Access Point

System Capacities
Summit WM Technical Reference Guide, Software Version 5.114
Altitude Access Point
The following table specifies the performance capacities of the Altitude
™
APs.
Table 2: Summit WM Controller WM100/WM1000 system capacities
Limit WM1000 WM100
Max # of APs 200 75
Max throughput 2 Gbits/sec 400 Mbits/sec
Max # of users (single controller) 4096 2048
Max # of users (multi-box/reserved) 4096 Local + 4096 Foreign 2048 Local + 2048 Foreign
Max # of VoIP calls 500 (up to 1000) 188 (up to 376)
Max # of WM-AD 50 32
Max # of routes 10 000 5000
Max # static routes 500 500
Max # dynamic learnt routes 9500 4500
Max # of admin users recommended 5 5
Max # of filter rules per group 128 128
Max # of filter groups or filter definitions 512 512
Max# of total filter rules 16 000 16 000
Table 3: Altitude Access Point system capacities
Limit 450/451 350-2i/350-2d
Max # 802.11 user associations per radio 127 127
Max # simultaneous transmissions per radio (open,
WEP, AES)
112 112
Max # simultaneous transmissions per radio (TKIP)
(*See note below)
56 V1.x: 16
V4.x-V5R1: 24
Max throughput per radio type
Wired to Wireless
11b=6
11g=26
11a=26
11a/n=147
11g/n=147
11b = 6 Mbits/sec
11g = 26 Mbits/sec
11a = 26 Mbits/sec
Max throughput per radio type
Wireless to Wired
11b=6
11g=24
11a=24
11a/n=144
11g/n=144
11b = 6 Mbits/sec
11g = 24 Mbits/sec
11a = 24 Mbits/sec
Max # of SSIDs per radio 8 8
Max # MAC ACLs per AP 768 768
Max voice calls per radio Wireless to Wireless WL2 11b/g = 4;
Spectralink 11b/g = 6
WL2 11b/g = 4;
Spectralink 11b/g = 6