Extreme Networks Summit WM - WM Access Domain Services configuration

Summit WM Technical Reference Guide, Software Version 5.1 155
CONFIG_MANAGER (2)
78 Exported image file [%s]
cannot be opened.
Possible problem with logging
system.
If problem persists, contact
Technical Support to
investigate.
79 Invalid AP SN [%s]. Possible problem with logging
system.
If problem persists, contact
Technical Support to
investigate.
80 Invalid sort criteria [%s]. Possible problem with logging
system.
If problem persists, contact
Technical Support to
investigate.
81 Unable to clear AP critical
alarm. Alarm ID [%d].
Possible problem with logging
system.
If problem persists, contact
Technical Support to
investigate.
82 Unable to send log export
response.
Possible problem with logging
system.
If problem persists, contact
Technical Support to
investigate.
83 Invalid page request [%d]. Possible problem with logging
system.
If problem persists, contact
Technical Support to
investigate.
Table 32: CONFIG_MANAGER (2) logs and events
Log ID Log Message Comment Action
Critical
1 Config Manager has suffered a
critical error and will halt.
Error Details:%s
OAM configuration system
restarts due to internal error.
Active Configuration request
may not have been processed.
System will restart
configuration manager.
If problem persists, contact
Technical Support to
investigate.
2 Access point controlled
software upgrade has failed.
This normally occurs if a
corrupt image file was selected
as the upgrade image. Please
select another image for the
upgrade:%s
Access Point upgrade fails. AP
may be prevented to register
with controller due to
configuration mismatch.
If problem persists, contact
Technical Support to
investigate.
3 Access point automatic
software upgrade/downgrade
has failed. This normally
occurs if a corrupt image file
was selected as the default
image. Please select another
default image. This alarm will
repeat as long as the system is
in automatic mode:%s
Access Point upgrade fails. AP
may be prevented to register
with controller due to
configuration mismatch.
If problem persists, contact
Technical Support to
investigate.
Table 31: EVENT_SERVER (1) logs and events (Continued)
Log ID Log Message Comment Action