Extreme Networks Summit WM - Page 153

Summit WM Technical Reference Guide, Software Version 5.1 153
48 Invalid information [%d].
Dropping the message.
Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
49 Invalid length [%d] for AP
serial number.
Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
50 Failed to extract SNMP PDU. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
51 Decoded SNMP PDU is NULL. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
52 Failed to update entries from
PDU. Error [%d].
Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
53 Invalid severity ID [%d]. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
54 Invalid AP alarm severity [%d]. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
55 Failed to send formatted log
message.
Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
56 Invalid OIDs in the AP alarm
PDU.
Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
57 No entries found in the AP
alarm PDU.
Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
58 Unable to get value from [%s]. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
59 [%s] not set in the AP alarm. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
60 SNMP encode failed. Problem interpreting log
message. Log entry may not be
performed. Low impact to the
system to the System.
If problem persists, contact
Technical Support to
investigate.
Table 31: EVENT_SERVER (1) logs and events (Continued)
Log ID Log Message Comment Action