Extreme Networks Summit WM - Page 175

Summit WM Technical Reference Guide, Software Version 5.1 175
Minor
33 Config Manager returned wrong
flag. Will retry retrieving
configuration.
Possible problem with
configuration of authentication
sub-system, in particular may
become unable to determine
correct Radius Configuration.
Connection retry should resolve
condition.
If problem persists contact
Technical Support to
investigate.
34 Internal error occurred for a
single request. RADIUS client
will ignore the error and
continue.
Possible issue with
configuration of authentication
sub-system. User should re-
attempt the registration thus
resolving issue.
If problem persists contact
Technical Support to
investigate.
35 Invalid radius server IP.
Subnet%d is not available.
Possible problem with
configuration or availability of
Radius Server. Users may be
unable to gain proper network
access.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition.
Verify Reachability of
RadiusServer utilizing the
RadiusTest feature in
GlobalSettings. If problem
persists contact Technical
Support to investigate.
36 Invalid NAS IP. Subnet%d is
not available.
Possible problem with
configuration or availability of
Radius Server. Users may be
unable to gain proper network
access.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition.
Verify Reachability of
RadiusServer utilizing the
RadiusTest feature in
GlobalSettings. If problem
persists contact Technical
Support to investigate.
37 Invalid retry count for
subnet%d. Default value will
be used.
Possible problem with
configuration or availability of
Radius Server or WM-AD
configuration of radius
parameters. Default parameters
will be used. No expected
impact to user authentication.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition.
Verify Reachability of
RadiusServer utilizing the
RadiusTest feature in
GlobalSettings. If problem
persists contact Technical
Support to investigate.
38 Invalid timeout setting for
subnet%d. Default value will
be used.
Possible problem with
configuration or availability of
Radius Server or WM-AD
configuration of radius
parameters. Default parameters
will be used. No expected
impact to user authentication.
Validate Configuration of
RadiusServer in GlobalSettings
and in WM-AD definition.
Verify Reachability of
RadiusServer utilizing the
RadiusTest feature in
GlobalSettings. If problem
persists contact Technical
Support to investigate.
Table 36: RADIUS_CLIENT (7) logs and events (Continued)
Log ID Log Message Comment Action