EXTREME SWITCHING ISW 4-10/100P User Manual

ISW Series Managed
Industrial Ethernet Switch
Command Reference Guide
ISW 4-10/100P, 2-10/100T, 2-SFP
ISW 4GbP, 2GbT, 2-SFP
ISW 8-10/100P, 4-SFP
ISW 8GbP, 4-SFP
9034963-01 Rev. 02
Published May 2017

EXTREME SWITCHING ISW 4-10/100P Specifications

General

Brand	EXTREME SWITCHING
Model	ISW 4-10/100P
Category	Network Router
Language	English

Summary

Getting Started with the ISW Switch

Execution Modes

ISW Commands

Initialize Mode Commands

Lists global commands available in the initialize mode.

Enable Mode Commands

Lists commands available for use in enable mode.

Configure Mode Commands

Covers commands for various switch configuration tasks.

VLAN Mode Commands

Commands for managing Virtual LANs.

Interface VLAN Mode Commands

Commands to configure interfaces within VLANs.

RingV2 Group Mode Commands

Commands for RingV2 protection group configuration.

Spanning Tree

Commands for configuring Spanning Tree Protocol settings.

sFlow Configure Command

SNMP Configure Command

Commands for Simple Network Management Protocol setup.

QoS Function Command

Commands for Quality of Service configuration.

IGMP Functional Commands

Commands related to Internet Group Management Protocol.

MVR Functional Commands

MLD Functional Commands

Authenticate Mode Commands

Commands for authentication server configuration.

Loop-Protection Configure commands

Commands for configuring loop protection features.

LLDP Configure commands

RFC2544 Testing Configure Commands

GVRP Configure Commands

Voice VLAN Configure Commands

Profile Alarm Commands

PoE Commands

Commands for Power over Ethernet configuration and management.

Configuring ERPS from the CLI

Details the process of configuring ERPS via the command line.