Extron electronics XTP II CrossPoint 1600 Setup Guide

22 XTP II CrossPoint Series • Front Panel Operations
Viewing and Adjusting the Audio Level
NOTES:
• Gain and attenuation can be adjusted for local inputs only.
• Volume can be adjusted for the local outputs only.
1. Press and hold the Audio button until it blinks.
AUDIO AUDIO
Audio button blinks
.Press and
hold.
2 seconds
2. Press an input or output button. The output buttons display the
input level and the input buttons display the volume; the more
lit buttons, the higher the level (see the "Operation" section of
the XTP II CrossPoint Series User Guide to read the displayed
value).
17 18
1 2
5
Press an Input button to adjust gain/attenuation.
Press an Output button to adjust volume.
Output buttons display gain/attenuation
.
Input buttons display volume.
1
Lit button Unlit button
1
3. Increase/decrease the level or volume by pressing the Esc (
>
)
And View (
<
) buttons.
ESC VIEW
button decreases
the le
vel or volume.
button increases
the level or volume.
4. Press and release the Audio button to exit.
Viewing Ties (and Muting Outputs)
1. Press the View button. Output buttons light for outputs that
have no ties established.
NOTE: If an output button blinks, that output is muted. To
toggle mute on and off, press and hold the output button
for 2 seconds.
2. Press an input button. The buttons for all tied outputs light.
3. Press an output button. The buttons for the tied input and all
tied outputs light.
4. Press the View button again to exit View mode. All input and
output buttons return to an unlit state.

Extron electronics XTP II CrossPoint 1600 Specifications

General

Brand	Extron electronics
Model	XTP II CrossPoint 1600
Category	Matrix Switcher
Language	English