Ezviz H3c User Manual

9
EZVIZ Connect
1. Use Amazon Alexa
These instructions will enable you to control your EZVIZ devices with Amazon
Alexa. If you run into any difficulties during the process, please refer to
Troubleshooting.
Before you start, make sure that:
1. EZVIZ devices are connected to the EZVIZ app.
2. In the EZVIZ app, turn off the "Image Encryption" in the Device Settings page.
3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new Echo-
Show, Fire TV (all generations), Fire TV stick (second generation only), or Fire
TV Edition smart TVs).
4. The Amazon Alexa app is already installed on your smart device, and you have
created an account.
To Control EZVIZ devices with Amazon Alexa:
1. Open the Alexa app and select "Skills and Games" from the menu.
2. On the Skills and Games screen, search for "EZVIZ", and you will nd "EZVIZ"
skills.
3. Select your EZVIZ device's skill, then tap ENABLE TO USE.
4. Enter your EZVIZ username and password, and tap Sign in.
5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so
that Alexa can control your EZVIZ devices.
6. You will see "EZVIZ has been successfully linked", then tap DISCOVER
DEVICES to allow Alexa to discover all your EZVIZ devices.
7. Go back to Alexa app menu and select "Devices", and under devices you will
see all your EZVIZ devices.
Voice Command
Discover a new smart device via the "Smart Home" menu in the Alexa app or the
Alexa Voice Control function.
Once the device is found, you can control it with your voice. Speak simple
commands to Alexa.
Your device's name for example: "show xxxx camera," can be changed in the EZVIZ
app. Each time you change the name of the device, you will need to discover the
device again to update the name.
Troubleshooting
What should I do if Alexa fails to discover my device?
Check if there are any Internet connecting problems.
Try to restart the smart device and re-discover the device on Alexa.
Why the device's status is "Oine" on Alexa?
Your device might have been disconnected from the network. Restart the smart
device and re-discover on Alexa.
Check if your router is connected to the Internet and try again.
For details about countries where Amazon Alexa is available, see Amazon Alexa's
ofcial website.

Ezviz H3c Specifications

General

Type	IP security camera
Virtual assistant	Amazon Alexa & Google Assistant
Placement supported	Outdoor
Connectivity technology	Wired & Wireless
Wide Dynamic Range (WDR)	Yes
Sensor type	CMOS
Optical sensor size	1/2.7 \
Minimum illumination	0.01 lx
LED type	IR
Night vision distance	30 m
Lens diameter	4 mm
Number of lenses	1
Total megapixels	- MP
Maximum resolution	1920 x 1080 pixels
Supported video modes	1080p
Video formats supported	H.264, H.265
Noise reduction technology	3D noise reduction
Bluetooth	No
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channel bandwidth	20 MHz
Wi-Fi data rate (max)	144 Mbit/s
Ethernet interface type	Fast Ethernet
Security algorithms	64-bit WEP, 128-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Intelligent Video Surveillance (IVS) system features	Human detection
Form factor	Bullet
Mounting type	Wall
Product color	White
International Protection (IP) code	IP67
Operating temperature (T-T)	-30 - 50 °C
Operating relative humidity (H-H)	0 - 95 %
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	512 GB
Power source type	DC
Power consumption (max)	6 W
Sustainability certificates	CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA, WEEE

Weight and Dimensions

Length	157 mm
Weight	250 g
Diameter	72 mm
Package depth	100 mm
Package width	227 mm
Package height	92 mm
Package weight	447 g