F.W. Bell 8000 series User Manual

F.W. BELL 8000 Series Gauss/Tesla Meter Instruction Manual
Section 8 – Remote Operation 8-24
Table 8-3 SCPI Error Queue Commands
COMMAND DESCRIPTION
:SYSTem:ERRor? Retrieve the most recent error message in the queue
:SYSTem:ERRor:NEXT? Retrieve and remove the oldest message in the queue
Table 8-4 SCPI System Information and Configuration Commands
COMMAND DESCRIPTION
:SYSTem:VERSion? Query the SCPI standard version number
:SYSTem:TIMe <NRf>,<NRf>,<NRf> Set the system clock in HH,MM,SS format
:SYSTem:TIMe? Query the system clock, returns HH,MM,SS format
:SYSTem:DATe <NRf>,<NRf>,<NRf> Set the system date in YYYY,MM, DD format
:SYSTem:DATe? Query the system calendar, returns YYYY,MM,DD format
:SYSTem:NETWork:ADDRess? Query the system network IP address
:SYSTem:LOGGing:DATa:REMove Remove all data logs from internal memory
Table 8-5 SCPI Status Register Commands
COMMAND DESCRIPTION
:STATus:MEASurement:EVENt? Query the Measurement Event register
:STATus:OPERation:EVENt? Query the Operation Event register
:STATus:QUEStionable:EVENt? Query the Questionable Event register
:STATus:MEASurement:ENABle <NRf> Set the Measurement Event Enable register
:STATus:OPERation:ENABle <NRf> Set the Operation Event Enable register
:STATus:QUEStionable:ENABle <NRf> Set the Questionable Event Enable register
:STATus:MEASurement:ENABle? Query the Measurement Event Enable register
:STATus:OPERation:ENABle? Query the Operation Event Enable register
:STATus:QUEStionable:ENABle? Query the Questionable Event Enable register
:STATus:MEASurement:CONDition? Query the Measurement Condition register
:STATus:OPERation:CONDition? Query the Operation Condition register
:STATus:QUEStionable:CONDition? Query the Questionable Condition register
:STATus:PRESet Clear all event enable registers
Table 8-6 SCPI Unit Commands
COMMAND DESCRIPTION
:UNIT:ANGLe DEG|RAD Define the vector summation angular units
:UNIT:ANGLe? Query the vector summation angular units
:UNIT:TEMPerature C|CEL|F|FAR|K Define the temperature units
:UNIT:TEMPerature? Query the temperature units
:UNIT:FLUX GAUSs|TESLa|AM|OERSted Define the flux density units
:UNIT:FLUX? Query the flux density units
:UNIT:TIMe SEC|HZ Define the time-based measurement units
:UNIT:TIMe? Query the time-based measurement units
Table 8-7 SCPI Range and Mode Commands
COMMAND DESCRIPTION
:SENSe#:FLUX:DC Set the instrument for dc flux density measurements
:SENSe#:FLUX:AC Set the instrument for ac flux density measurements
:SENSe#:FLUX:RANGe:AUTo <b> Enable/disable auto range in dc mode

F.W. Bell 8000 series Specifications

General

Brand	F.W. Bell
Model	8000 series
Category	Measuring Instruments
Language	English