Name: F.W. Bell 8000 series
Brand: F.W. Bell
Rating: 4 (1 reviews)

To Next Page

To Previous Page

F.W. BELL 8000 Series Gauss/Tesla Meter Instruction Manual

Section 8 – Remote Operation 8-26

Table 8-12 SCPI Zeroing Commands

COMMAND DESCRIPTION

:CALibration#:ZERo:HSENsor:INITiate Zero the Hall probe and instrument for single channel

:CALibration#:ZERo:HSENsor:MODe <n> Set the auto zero mode

:CALibration#:ZERo:HSENsor:MODe? Query the auto zero mode

:CALibration:ALL:ZERo:HSENsor:INITiate Zero the Hall probe and instrument for all channels

:CALibration:ALL:ZERo:HSENsor:MODe <n> Set the auto zero mode for all channels

Table 8-13 SCPI Relative Offset Commands

COMMAND DESCRIPTION

:INPut#:OFFSet <NRf> Set relative offset value

:INPut#:OFFSet? Query relative offset value

:INPut#:OFFSet:STATe <b>|ONCe Enable/disable the relative offset function

:INPut#:OFFSet:STATe? Query state of relative offset function

Table 8-14 SCPI Analog Output Commands

COMMAND DESCRIPTION

:OUTPut#:UNCorrected:MODe <n> Set the output mode of the uncorrected analog output

:OUTPut#:UNCorrected:MODe? Query the output mode of the uncorrected analog output

:OUTPut#:UNCorrected:SCALing <n> Set the scaling of the uncorrected analog output

:OUTPut#:UNCorrected:SCALing? Query the scaling of the uncorrected analog output

:OUTPut#:CORRected:MODe <n> Set the output mode of the corrected analog output

:OUTPut#:CORRected:MODe? Query the output mode of the corrected analog output

:OUTPut#:CORRected:SCALing <n> Set the scaling of the corrected analog output

:OUTPut#:CORRected:SCALing? Query the scaling of the corrected analog output

:OUTPut:VECTorsum:MODe <n> Set the output mode of the vector sum analog output

:OUTPut:VECTorsum:MODe? Query the output mode of the vector sum analog output

:OUTPut:VECTorsum:SCALing <n> Set the scaling of the vector sum analog output

:OUTPut:VECTorsum:SCALing? Query the scaling of the vector sum analog output

Table 8-15 SCPI Vector Summation Command

COMMAND DESCRIPTION

:CALCulate:VSUMmation? Query vector summation result and angles (8030 only)

Table 8-16 SCPI Hold Commands

COMMAND DESCRIPTION

:CALCulate#:HOLD:MINimum:STATe <b> Enable/disable the MIN HOLD function

:CALCulate#:HOLD:MINimum:STATe? Query the state of the MIN HOLD function

:CALCulate#:HOLD:MINimum:CLEar Resets the value being held by the MIN HOLD function

:CALCulate#:HOLD:MINimum? Query the value being held by the MIN HOLD function

:CALCulate#:HOLD:MAXimum:STATe <b> Enable/disable the MAX HOLD function

:CALCulate#:HOLD:MAXimum:STATe? Query the state of the MAX HOLD function

:CALCulate#:HOLD:MAXimum:CLEar Resets the value being held by the MAX HOLD function

:CALCulate#:HOLD:MAXimum? Query the value being held by the MAX HOLD function

:CALCulate#:HOLD:PEAK:STATe <b> Enable/disable the PEAK HOLD function

:CALCulate#:HOLD:PEAK:STATe? Query the state of the PEAK HOLD function

:CALCulate#:HOLD:PEAK:CLEar Resets the value being held by the PEAK HOLD function

:CALCulate#:HOLD:PEAK? Query the value being held by the PEAK HOLD function

Brand	F.W. Bell
Model	8000 series
Category	Measuring Instruments
Language	English

F.W. Bell 8000 series User Manual

Table of Contents

Questions and Answers:

F.W. Bell 8000 series Specifications

Related product manuals