The 412 Operator and
450 MPS Control Panel:
Installation Manual
Contents
Important Safety Information........................................................................2
Technical Data ..............................................................................................4
The 412 Compact Operator....................................................................4
The Control Panel ..................................................................................4
Unpacking the Operator ................................................................................ 5
The 412 Compact Operator........................................................................... 6
General Characteristics ..........................................................................6
Operating Logic .....................................................................................6
Manual Release Mechanism ........................................................... 6
General Operating Logic ................................................................ 7
Logical Operating Modes ...............................................................7
Installation Instructions............................................................................... 10
Prepare the Gate...................................................................................10
Install the Operator ..............................................................................10
Establish the Orientation of the Operator and the Gate Leaf........ 10
Attach the Rear Mounting Bracket .............................................. 10
Attach the Operator to the Rear Mounting Bracket ......................12
Attach the Operator to the Front Mounting Bracket..................... 12
Attach the Front Mounting Bracket to the Gate Leaf ...................12
Attach the Operator Cover............................................................ 13
Install the 450 MPS Control Panel...................................................... 14
Connect the Main Power Supply .................................................. 14
Connect One Activating Device ...................................................15
Connect the Operator(s) to the Control Panel.............................. 15
Check the Motor’s Direction of Rotation ....................................17
Connect Other Devices .................................................................17
Set Operating Controls.........................................................................20
Set DIP Switches .......................................................................... 20
Adjust the Potentiometers.............................................................20
Maintenance ................................................................................................ 21
The 412 Operator ................................................................................. 21
The Control Panel ................................................................................21
Troubleshooting ..........................................................................................22
FAAC International, Inc.
303 Lexington Avenue
Cheyenne, WY 82007
To Next Page
Need help?
General
