FAAC 413 - Technical Specifications; Versions; Installation; Electrical Set-up

ENGLISH
3. TECHNICAL SPECIFICATIONS
(1)
If no closing and opening mechanical travel stops are used, the operator travel is 350 mm
(2)
With leaves exceeding 1.8 m the fitting of an electric lock is required to ensure the leaf locking
3.1. Versions
For CSA-UL approved operators, control unit 455 MPS UL 115 must be used in order to maintain the approval.
4. INSTALLATION
4.1. Electrical set-up (standard system)
Notes:
• Use suitable tubes and/or hoses to lay electric cables
• To avoid any kind of interference always separate low-voltage accessories and control cables from 230/115 V~ power supply
cables using separate sheaths.
SNOITACIFICEPSLACINHCET 314 SL314 V42314 V42SL314 V511314 V511SL314
ylppusrewoP~V032cdV42~V511
)W(rewoP05207062
)A(tnerruC1,132.2
)C°(noitcetorplamrehT041-041
)Fµ(roticapaC3,6-02
)
Nad(tsurhT002052002
)mm(levarT 003
)1(
)ces/mc(deepS 6,158,1
)m(.xamfaeL 5,2
)2(
C°02taycneuqerfesudnaepyT%03-3S%53-3S%001%03-3S%53-3S
C°02taruoh/elcyc.nimetamixorppA03~001~03~
)C°(erutarepmet
tneibmagnitarepO 55+02-
)gK(thgiewrotarepO 5,6
)mm(htgnelrotarepO 2.gifees
)mm(snoisnemidrotarepO 2.gifees
ss
alcnoitcetorP 45PI
LEDOM NOISREV
314ROTAREPO spotslevartlacinahcemgnisolc/gninepohtiwrotarepo~V032
SL314ROTAREPO sehctiwstimilgnis
olc/gninepodnaspotslevartlacinahcemgnisolc/gninepohtiwrotarepo~V032
V42314ROTAREPO spotslevartlacinahce
mgnisolc/gninepohtiwrotarepocdV42
V42SL314ROTAREPO sehctiwstimilgnisolc/gninepodnaspotslevartlacinahcem
gnisolc/gninepohtiwrotarepocdV42
V511314ROTAREPO spotslevartlacinahcemgnisolc/gninepohtiwrotarepo~V511
V
511SL314ROTAREPO sehctiwstimilgnisolc/gninepodnaspotslevartlacinahcemgnisolc/gninepohtiwrotarepo~V511
.soP noitpircseD selbaC
1srotarepOmm5.1x4
2
mm5.1x2(
2
)
2tinulortnoC
mm5.1x3
2
)ylppusrewop(
3sllecotohpXTmm5.0x4
2
4sllecotohpXRmm5.0x2
2
5hctiwsrotcelesdetarepo-yeKmm5.0x2
2
mm5.0x3(
2
)
6pmalgnihsalFmm5.1x2
2
7revieceRmm5.0x3
2
8spotslacinahceM-
Fig. 3
13