P a g e | 1
These instructions are to be considered as a rapid guide for installation of the FAAC A951 for
both a single door installation or double door installation with On Door Safety Sensors and a
check for opening/closing speeds along with the Hold Open time. We have included references
where to find relevant wiring information for the fitting of Safety Sensors to protect the swept
area of door/doors as specified by specified by the Risk Assessment undertaken by the
installer. The installer should still familiarise themselves with the full manual and the safety
information contained within. (available at https://www.faac.co.uk/door/swinging-
doors/951-swing-door-operator)
To Next Page
Need help?
General
