Need help?Do you have a question about the FAAC A951 and is the answer not in the manual?
General| Brand | FAAC |
|---|---|
| Model | A951 |
| Category | Door Opening System |
| Language | English |
Provides safety guidelines for installers, emphasizing personal protection and work area safety.
Specifies intended use and outlines limitations on door size, weight, and usage.
Prohibits unauthorised uses and provides instructions for emergency situations.
Step-by-step guide for installing the sliding arm for inward-opening doors.
Step-by-step guide for installing the articulated push arm for outward-opening doors.
Specifies structural and mechanical conditions required for safe and proper installation of the automation.
Outlines electrical safety, compliance, and wiring requirements for the installation.
Details safety measures and standards (EN 16005) for preventing injury from moving door parts.
Detailed instructions for wiring and configuring safety sensors (XPB ON, XPB SCAN) to the I/O board.
Instructions for connecting an electric lock, including power requirements and programming parameters.
Explains the various functions that can be assigned to the inputs on terminal board J4.
Details the functions that can be assigned to the outputs on terminal board J5.
Outlines initial steps, precautions, and basic/advanced programming on the A951 unit.
Explains the different operating modes of the A951, such as Automatic, Night, and Manual.
Details the procedure for setting up the automation and how to perform a system reset.
Procedures to check the logic status of inputs and outputs on the board or via KP EVO.
How to check the current operating status and view warning alerts on the board or via KP EVO.
Lists common errors, their causes, and required actions, including hardware replacement.
How to check forces generated by the door leaf and apply safety signage and CE marking.
Lists scheduled maintenance operations for structures, frame, operator, sensors, and the door.
To Next Page
