FAAC A951 - I;O Board; J3 - Kp Evo; J4 - Inputs; J5 - Outputs

A951 26 532081 - RevA
1
10
1
10
G
Tx
Rx
V
J5 J4
24
J3
+24V

+24V

-
I1
I2
I3
I4
S1
S2
-
Translation of the original instructions
ENGLISH
J3 Connection KP EVO
J4 Inputs Connection
J5 Outputs Connection
6.5 I/O BOARD
J3  KP EVO
J4  INPUTS
1 Power supply negative and common inputs
2 I1 INTERNAL OPEN input with NO contact - (programmable)
3 I2 EXTERNAL OPEN input with NO contact - (programmable)
4 I3 KEY input with NO contact - (programmable)
5 I4
INTERLOCK ON input with NO contact - (programmable)
6
7
+24V
"
accessories power supply (700mA max)
8 Power supply negative and common inputs
9 S1 input disabled - (programmable)
10 S2 input disabled - (programmable)
G Power supply negative
TX Data transmission
RX Data reception
V +24 V power supply

To connect the KP EVO see § 8.1.

The inputs of terminal board J4 (I1-I4 and S1-S2) can
be configured on the A951 or via the KP EVO.
The diagram and table show the default functions.