FAAC A951 - Communication Board Installation

A951 58 532081 - RevA
CL
ON
12
CH G
J6 J4 J2
SW1
J1
52
51
49
50
Translation of the original instructions
ENGLISH
14. COMMUNICATION BOARD
The Communication board provides the following
additional features:
-
Intercom.
- BUS 2easy.
- Mounting for the XF radio module (optional) for
storing radio control codes.
14.1 INSTALLATION
F
CARRY OUT THE FOLLOWING OPERATIONS WITH THE
ELECTRICITY SUPPLY DISCONNECTED.
1. Insert the XF radio module, if used, into connector
J1 (49).
2. Install the board by inserting it into the guides
(50).
3. Connect the
Communication board to the Logic
board using the cable provided (51).
Description of components (52):
J1 XF radio module connector
J2
Intercom bus terminal board
J4 BUS 2easy terminal board
J6
Logic board connector
SW1 intercom functions DIP switch