A951 22 532081 - RevA
16
1
2
17
18
P= 80...200P= 0...80
2.5
2
P
15
Translation of the original instructions
ENGLISH
5.4 ARTICULATED ARM
!
Be careful when working in the area of movement of
the articulated arm because of the following risks:
- Finger crushing / shearing hazard.
- Hooking / entanglement of clothing, tools, equip-
ment.
The pack contains two arms of different lengths, to
use according to the depth (15).
1. Using a spirit level and the screws and washers
provided, fasten the arm plate to the door using
the previously drilled holes (16).
!
The arm plate must be fastened to the door using
appropriate fasteners (dowels, self-tapping screws
etc.) and tightened appropriately according to the
support material.
2. Install the two bushes on the telescopic arm
(17).
3. With reference to 18:
- Connect the telescopic arm to the arm plate using
the using the pin (1).
- Press the Benzing ring (2) on.
To Next Page
Loading...
