FAAC A951 - KP EVO Controller Installation; KP EVO Installation and Wiring

A951 39 532081 - RevA
31
1
2
32
1
1
1
33
U/UTP CAT.5 4x2xAWG24
2
2
Translation of the original instructions
ENGLISH
max 50 m
8. KP EVO
8.1 INSTALLATION AND CONNECTIONS
F
CARRY OUT THE FOLLOWING OPERATIONS WITH THE
ELECTRICITY SUPPLY DISCONNECTED
1. Disassemble the parts indicated in (31).
2. Break the cable passage insert.

With reference to 32, the KP EVO is designed
for the cables to enter from the back (1) or from
underneath (2).
3. Decide where to position the support and fix it
using suitable screws (31- 1).
4. Connect the KP EVO to the A951 using a 4 pair
twisted U/UTP AWG24 cable with a maximum
length of 50m (33).

An optional key device can be connected between ter-
minals G and K in order to enable/disable the KP EVO.
5. Reassemble the parts indicated in (31).