A951 24 532081 - RevA
21
4
Translation of the original instructions
ENGLISH
5.5
CONNECTING THE TRANSMISSION ARM
Depending on the distance between the upper edge of
the door and the architrave, the transmission arm can
be fastened directly to the shaft of the A951 or using
spacers that are supplied separately as an accessory.
The components in the package allow two 35mm
extensions to be used.
A maximum of 2 extensions can be installed.
Insert the transmission arm directly onto the rotating
shaft or use the spacers as shown in 21 and fasten
using the screw.
Use the screw supplied together with the transmission
arm if no extensions are used.
The optional spacers are supplied with 2 screws of
different lengths, to use according to the extensions
that are installed (the longer one is when 2 extensions
are used).
■ NO EXTENSION
■ 1 EXTENSION
■ 2 EXTENSIONS
To Next Page
Loading...
