A951 23 532081 - RevA
2
3
1
4
2
1
3
20
19
8
Translation of the original instructions
ENGLISH
4. Assemble as indicated in 19:
- Place the spacer (1) between the articulated arm
(2) and the transmission arm (3).
- Press the Benzing ring on (4)
5. Connect the transmission arm to the rotating
shaft (see § 5.5).
6. Position the door in the required maximum open-
ing position.
7. Assemble as indicated in 20:
- Align the articulated arm (1) with the telescopic
arm (2).
- Tighten the screws (3) into the threaded holes on
the articulated arm.
8. Move the door manually to make sure there is no
friction and that it does not jam.
To Next Page
Loading...
