FAAC A951 - Electric Lock Connection

A951 29 532081 - RevA
-
J5
-
J5
27
28
J4J5
1 2 3 4
ON
1 2 3 4
ON
A
B
26
XPB SCAN
I/O
+24 V
-
test
+24 V
+24 V
■ XPB SCAN
S1
S2
(B)
(A)
Translation of the original instructions
ENGLISH
6.7 CONNECTING THE LOCK
If the lock needs to be powered in order to be released,
connect it as indicated in 27.
If the lock needs to be switched off in order to be
released, connect it as indicated in 28.
Maximum power consumption: 500 mA 24V
"
.
In advanced programming on the A951:
- define the operating mode of the lock (parameter
EL).
- set the opening delay of the door to allow the
lock to be opened, particularly motorised ones
(parameter Et).
- if necessary, enable the reverse stroke to facilitate
the release of the lock (parameter rS).

Access the motor block configuration menu via the
KP EVO in order to set the functions described above.
grey
red
blue
green
brown
yellow
white
pink