A951 62 532081 - RevA
Translation of the original instructions
ENGLISH
16. BUS 2EASY
This dedicated connection is specifically for to single channel FAAC BUS 2easy control devices.
For installation and wiring, refer to the device instructions.
When finished, it has to be registered via the KP EVO (KP EVO menu 2.5.8).
In the A951, the DIP switches of the devices are associated with the following functions:
DIP switch
1 2 3 4
command
0 0 0 0 AUTOMATIC OPENING
0 0 0 1 EXTERNAL OPENING
0 0 1 0 INTERNAL OPENING
0 0 1 1 SEMI-AUTOMATIC OPENING
0 1 0 0 KEY
0 1 0 1 NOT USED
0 1 1 0 NOT USED
0 1 1 1 NOT USED
1 0 0 0 NOT USED
1 0 0 1 PARTIAL AUTOMATIC OPENING
1 0 1 0 PARTIAL EXTERNAL OPENING
1 0 1 1 PARTIAL INTERNAL OPENING
1 1 0 0 PARTIAL SEMI-AUTOMATIC OPENING
1 1 0 1 PARTIAL KEY
1 1 1 0 NOT USED
1 1 1 1 NOT USED
!
For each control device connected to the BUS 2easy
line, position the DIP switches so that only one com-
mand is used on a single device.
To Next Page
Loading...
