FAAC A951 - Operating Modes Configuration

A951 37 532081 - RevA
30
Translation of the original instructions
ENGLISH
7.3 OPERATING MODE
The operating mode is set by the 3-position selector
switch on the side (30) or the KP EVO.
The A951 operating modes are:

AUTOMATIC
The door opens and closes again after the set pause
time has elapsed.
ALWAYS OPEN
The door opens and remains open.

NIGHT
The door closes and the internal and external sensors
are disabled.

MANUAL
The door is free to move and can be moved manually.
All controls are disabled. The lock is kept open.

BI-DIRECTIONAL
The pedestrian transit way opens in both directions;
the internal and external sensors are enabled.

EXIT ONLY
The pedestrian transit way opens in only one direction;
the external sensors are disabled.

ENTRY ONLY
The pedestrian transit way opens in only one direction;
the internal sensors are disabled.
100%
TOTAL
The door opens completely.
%
PARTIAL
Only selects the master door in the “2 leaves” mode.
INTERLOCK
See § 10.2.
11 Operating mode combinations









100%

%

Positions 1 and 2 of the selector on the side can be con-
figured in the advanced on board programming func-
tion (parameters S1 and S2) or via the KP EVO. 30
shows the factory configuration.
POSITION 2

AUTOMATIC

POSITION 1
