11 < < < <
UK IRL
Attention:
Before placing the glass: check the glass sealing rope is in good condition and makes an
effective seal. Be sure that there are no fingerprints on the glass. It is not possible to
remove those prints after you burn the appliance for a while (they are burnt in). Place the
glass in front of the appliance and fix the glass frame or use the glass clamps.
6.3 Cleaning the combustion chamber and burner
If the burner is visibly damaged, this can affect the distribution of the flame, if so then
replace the damaged parts.
To replace:
• Remove the burner tray assembly
• Remove the front, glass, and log holder (if applicable)
• Break the gas supply at the control valve.
• Unscrew the burner assembly and take them out of the combustion chamber.
6.4 Rebuild to other gas category (e.g. Propane/butane)
Rebuilding to another gas category is only possible by exchanging the complete burner
plate. Ask your local dealer and bring the serial number of the appliance.
To Next Page
Loading...
Need help?
General
