Factor SLiCK - Rear Dropout Service and Repair; Storage Pack Installation; Rear Storage Pack Rail Mounting (9-1); Storage Pack Sliding and Securing (9-2)

Rear dropout
Storage Pack
5-55-4
7-3
Assembly Manual 13
8-1
9-1 9-2
In case of dropout replacement, apply Loctite 243 on bolts
threads and tighten to 1 Nm.
Install the rear Storage Pack rail to the seat tube by tightening
the provided M5 torx head bolts to 2 Nm.
Slide the Storage Pack down the rail until it securely clicks
into position.