Faema E92 - Programming; Technician Programming - Coffee Selection; Technician Programming - Cappuccino - Milk Selection

164
EnglishEnglish
Display of available menus: press the PROG (32) key.
Access to menus: Use the “+” (34) and “-“ (35) keys to position the
cursor on the desired line, then press the PROG (32) key (press a
selection key if the ”SELECT KEY” menu appears).
Use the “+” (34) and “-“ (35) keys also to modify the message or
number.
Note: When modifying data, the cursor changes to "
ÆÆ
ÆÆ
Æ".
Exiting the programming menu: press the
444444
444444
444
(33) key.
2. Programming
31 32 33 34 35 36
Press one of the coffee dispensing keys (the relative led will remain
on, not flashing). The following message will appear on the display:
The following coffee selection parameters can be modified:
- water dose (volumetric dosage pulses, from 0 to 999, with
increments of 1).
3. Technician programming - Coffee selection
Press one of the cappuccino – milk dispensing keys. The related LED
remains on and does not blink. The display appears as follows:
Cappuccino-milk selection parameters that can be changed are:
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with increments
of 0.1);
- Milk start/coffee start ** (milk dispensing delayed after coffee
dispensing, and vice versa)
- Water dose (volumetric dosage pulses: 0 ÷ 999, with increments
of 1).
4. Technician programming - Cappuccino - Milk selection
TECHNICAL PROG.
KEY MENU
+
u
u
Friday 09:20
Boiler P. 1.1bar
selection XXX
Water dose 090
+
u
u
selection XXX
Water dose 090
+
u
u
selection XXX
Milk dose 03.6s
+
u
u