Faema E92 - Technician Programming - Configuration Menu - Data Menu

167
EnglishEnglish
8. Technician programming - Configuration menu - Data menu
Press the PROG (32) key; the following message will
appear on the display:
Parameters calculated are:
- N. coffee (number of coffee beverages)
- N. milk (number of milk beverages)
- N. water (number of times water is dispensed)
- N. steam (number of times steam is dispensed using the steam
button)
DATA menu: COUNTERS
- N. steam TS (number of times steam is dispensed using the
autosteam function)
- N. steam + air TS (number of times steam and air are dispensed
using the autosteam function)
- N. tot coffee (total number of coffee beverages).
The "Nr. Coffee" line appears as many times as the number of groups
on the machine.
Counters can be zeroed by aligning the cursor on the selected entry,
pressing the PROG (32) key, and then pressing the ‘+” (34) or “-“ (35)
key.
Note: Parameters that cannot be zeroed are:
- N. tot coffee
DATA menu: MALFUNCTIONS ARCHIVE
If the PROG (32) key is pressed when the cursor is on the “error log”
line, the following appears on the display:
The figures appearing after the “error code” indicate, in hours and
minutes, the time that has passed since the last recorded error.
If the PROG (32) key is pressed again, the details page is accessed.
The following appears on the display:
- day and hour when the error occurred
- machine groups status when the error occurred.
DATA menu: INFO
Press the PROG (32) key; the following message will
appear on the display:
Serial number
CONFIGURATION
DATA MENU
+
u
u
DATA MENU
COUNTERS
+
u
u
DATA MENU
MALFUNCT. ARCHIVE
+
u
u
MALFUNCT. ARCHIVE
01 XXX 23:44
+
u
u
DATA MENU
INFO
+
u
u
INFO
SERIAL NUMBER
+
u
u
SERIAL NUMBER
1234567
+
u
u