24 EN
Counters are displayed by pressing the
() key.
The following message appears on the display (5):
Parameters calculated are:
- N. coffee (number of coffee beverages)
- N. water (number of times water is dispensed)
- N. steam (number of times steam is dispensed using the
steam button)
- N. steam TS (number of times steam is dispensed using
the turbosteam function)
- N. steam + air TS (number of times steam and air are
dispensed using the turbosteam function)
- N. tot coffee (total number of coffee beverages).
Counters can be zeroed by aligning the cursor on the selected
entry, pressing the
“PRG” key (), and then pressing the
“+” () or “” () key.
Press the
“RES” key (WRFRQ¿UP]HURLQJ
The "N. coffee" entry appears for as many times as there are
machine groups.
Note: Parameters that cannot be zeroed are:
- N. tot coffee
Press the
“RES” key () to return to the main menu.
1RWH: When modifying data, the cursor changes to " Æ", or
a slide bar with maximum and minimum settings will appear:
If the "&XVWRPHU3URJU" is set to "NO", the following message
will appear on the display:
1% ONLY if the item “&XVWRPHU3URJU” is set on “<(6" and
the item “3URJUDPEORFN” is set on “12".
To access programming press the “PRG” key ( WKH
following message will appear on the display:
Press one of the dispensing keys on the selection panel (
the relative led will remain on.
Use the
“+” () and “” () keys to position the cursor
(black line) on the desired line, then press the
“PRG” key
().
Always use the
“+” () and “” () keys to change the
VHWWLQJDWWKLVSRLQWWKHUHDUHWZRSRVVLELOLWLHV
FRQ¿UPWKHFKDQJHVPDGHE\SUHVVLQJWKH
key
2) exit the menu and leave the settings unchanged by pressing
the
“RES” key ().
À&2817(560(18
1° coffee gr. 1 01234
1° coffee gr. 2 01234
1° coffee gr. 3 01234
1° water 01234
1° steam 01234
À
&86720(5352*
.(<0(18
001 cof. dose 064
ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ
&86720(5352*
127(1$%/('
ÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀÀ
'$7$PHQX&RXQWHUGLVSOD\DQG]HURLQJ
+RZWRDFFHVVWKHSURJUDPPLQJPRGH