OK
1 2
#
#
27 EN
The water doses for coffee and the hot water doses can also
be set using the "SELF-SETTING' function:
press and hold the STOP button for at least 8 seconds or until
you hear a buzzer sound that will keep sounding throughout
the programing. The menu below will appear on the display,
showing the keys with the relative quantities for water for the
coffee.
Coffee measures
)LOO WKH ¿OWHUKROGHU ZLWK WKH UHTXLUHG GRVDJH RI JURXQG
coffee and insert it in the dispenser unit.
3XWWKHFXSRUFRQWDLQHUXQGHUWKH¿OWHUKROGHUVSRXWVDQG
SUHVVWKHEXWWRQWREHSURJUDPHG.HHSLWSUHVVHGXQWLOWKH
desired level is reached in the cup or container.
During this phase, the setting for the volumetric dosage
pulses (top right of display) is increased. When the key is
released, the setting reached is memorized and appears
under the programmed key.
3 - Starting from step 1, continue programing, as desired, on
all the coffee buttons.
Hot water measures
1 - Press the button to be programed and keep it pressed until
the desired level is reached in the cup.
During this phase the time in seconds (top right of display)
LVLQFUHDVHGZKHQWKHNH\LVUHOHDVHGWKHVHWWLQJUHDFKHG
is memorized and appears below the programmed
key.
2 - Starting from step 1, continue programing, as desired, on
all the water buttons.
:KHQ¿QLVKHGSUHVVWKH6723EXWWRQ7KHEX]]HUZLOOWXUQ
RIIWKXVFRQ¿UPLQJWKDWWKHSURJUDPLQJKDVEHHQFRPSOHWHG
STOP
SELF-LEARNING
Group 1 DV: 000
To Next Page
Loading...
