EasyManua.ls Logo

Faema X20 - Cup Tray; Decaffeinated Door; Bodywork

Faema X20
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 2
5
11
11
29 EN
English
At the end of the working day, pour a jug
of hot water into the basin (11) to remove
any encrustation in the drain; remove it
and wash it with running water.
CUP TRAY (11)
To remove it, grip and pull the basin (11)
lifting it slightly.
Do not use abrasive products; do not put
in the dishwasher.
NOTE: the procedures described below must be carried out when the machine is switched off.
DECAFFEINATED DOOR (5)
Use a damp sponge to remove any residue on the inside of the door and
in the decaf coffee conduit.
BODYWORK
Warning: the shiny parts of the bodywork must be cleaned using a soft cloth
and cleaning products WITHOUT ammonia or abrasives, removing any organic
residue present in the work area. In the case of tough dirt, use a damp sponge
and dry with a soft cloth.
Note: DO NOT spray liquid in the slots of the body panels and DO NOT use paper
or rough cloth for cleaning.
02_QUICK_UNICO_1815_USA_en_fr.indd 29 11/04/2018 11:24:57

Table of Contents

Related product manuals