Fagor BCSD - Page 45

Installation manual
BCSD
System
PLC
4.
REF. 1711
·45·
PLC program
;
M_POWER_ON ; Machine with power
AND NOT M_REFERENCE ; Axis homing done
= MSG3 ; Axis homing
;
;*********************************************************************
;PLC ERRORS
;
; Management of PLC errors
;
;*********************************************************************
;
; Please write the PLC errors here
;
;*********************************************************************
; SERVICE SCREEN
;
; Management of the Service screen.
; Service screen will be enabled while pushing the B18R562
; and CNC is in ISO+FOLLOWING ERROR, EXECUTION+FOLLOWING ERROR
; or CONVERSATIONAL screens.
;
;*********************************************************************
;
DFU B18R562 ; CNC external button for Service
= CPL M300 ; Commissioning OEM Screen ON
;
;*********************************************************************
;TIME COUNTER
;
; Management of the CNC ON and Spindle running timers.
; C3 is the amount of hours that the CN is ON.
; C6 is the amount of hours that the Spindle is ON.
;
;*********************************************************************
;
; CNC ON
;------------------------------------------------------------------------------------------------
;
DFU M2017 ; 1 second marker
OR DFD M2017 ; 1 second marker
= CUP 1 ; CNC on seconds
;
CPS C1 GE 60 ; CNC on seconds
= CUP 2 ; CNC on minutes
= CPR 1 0 ; CNC on seconds
;
CPS C2 GE 60 ; CNC on minutes
= CUP 3 ; CNC on hours
= CPR 2 0 ; CNC on minutes
;
; SPINDLE RUNNING
;------------------------------------------------------------------------------------------------
;
DFU M2017 ; 1 second marker
OR DFD M2017 ; 1 second marker
AND DRENAS ; Spindle drive power ON
= CUP 4 ; Spindle ON seconds
;
CPS C4 GE 60 ; Spindle ON seconds
= CUP 5 ; Spindle ON minutes
= CPR 4 0 ; Spindle ON seconds
;
CPS C5 GE 60 ; Spindle ON minutes
= CUP 6 ; Spindle ON hours
= CPR 5 0 ; Spindle ON minutes
;
;
;