20
13 DELIMING
In order to maintain dishwasher at optimum conditions, it is requested to remove lime and corrosion
deposits on a frequent basis. A deliming solution should be available from your chemical supplier.
Read and follow all instructions on the label of the deliming solution. Operations:
• Fill the machine. Add the correct amount of deliming solutions as recommended by the
deliming solution manufacturer. The water capacity of the tank can be verified on the
specification sheet of this manual
• Remove detergent and rinsing tubes from containers so no chemicals go to the machine
• Run the machine for the recommended period of time. As many cycles as needed.
• Turn off the machine and open the door
• When clean, drain and re-fill the machine
• Run machine for 3-4 cycles to remove deliming solution
• Drain the machine.
14 RECOMMENDED SPARE PARTS
Part number Description
P255001 Water fill valve (dual)
R223005 Tank heating element 2000 W.
Z203009 Door switch
Z203062 Door relay
Z211903 Rinsing nozzle
Z213007 Contactor
Z393005 Boiler thermostat
Z400709 Washing nozzle
Z400711 Washing nozzle bracket
Z401001 Pump motor 60Hz.
Z421711 Boiler heating element 2800W.
Z433011 Pressure switch
Z448302 Timer
Z718441 Tank thermostat
Z433001 General selector switch
Z223501 Drain pump
V817100 6 MF Capacitor
Q307051 Gasket for Overflow Tube
Z400907 Overflow Tube
Z231105 Antireturn valve
U183046 Terminal Block
Z200107 Adjustable Leg
Z651123 Rinse Aid Dispenser
1200000132 Detergent Pump Kit
To Next Page
Loading...
Need help?
General
