Assembly & Disassembly and Cleaning of Front Wheel:
1. Pull out the front wheel with your finger and tools and then clean it.
(Refer to the figure)
2. Insert and press the front wheel into the right position while
assembling.
9-4. Cleaning of Sensor and Infrared Transparent Window:
1.Clean the sensor and infrared transparent window with the cotton swab or
soft cloth.
2.The wall detection sensor is in the front of the Cleaner, while the
ground detection sensor and infrared transparent window are in the
bottom of the cleaner. (Refer to the figure below)
3.Please keep the transparent window clean so as to make the cleaner work
better.
To Next Page
Loading...
