conversation on incoming calls. End the call by hanging up or press on the receiver handset.
Volume control
Adjust the volume in the ECII™ Flex speaker by using a screw driver to turn the volume control.
The control is located on one of the sides of the ECII™ Flex.
- To increase the volume; turn the control counter clockwise and
- To decrease the volume; turn the control clockwise.
The ECII™ Flex will set the volume automatically as the volume control is turned. The new
volume will be used in all following calls.
Please note that previous versions of the ECII™ Flex have a different procedure for the volume
control:
To change the volume during a call on older versions then SW 0.2.4:
- Turn the volume control
- Ask the receiver to press ‘4’ on the receiver handset
- The new volume is set in the ECII™ Flex
7.9.1 Remote volume control
The receiver is able to change the volume in the ECII™ Flex remotely during a call by pressing:
6-3 to increase the volume
6-9 to decrease the volume
The function requires that the alarm is acknowledged.
162187 Manual FältCom ECII™ Flex Page 35 of 40
To Next Page
Loading...